|
10oz Pneumatic Cartridge Gun Applicator |
|
Cartridge gun dispensers are designed for the controlled
application of pastes, gels, adhesives and fluids. We offer our
customers the most cost effective cartridge gun dispensing systems.
All guns are covered by a one year warranty and supplied with a
starter kit of dispensing components. |
|
 |
|
A high quality pneumatic
cartridge gun with metal threaded retainer and pistol grip. 10oz size (310ml,
310cc or 1/10 Gallon size. Suited to controlled lines or
potting of most adhesives, fluids, sealants, RTV, solder paste, grease, gels, long cure or
single part epoxies, mastics and potting compounds. Can be used with
standard 310ml type silicone and sealant pre-filled tubes.
Connect an air
line to the applicator with a 1/4 Inch BSP threaded female fitting to the male thread
or use optional 1000-12 hose. This gun features a
built-in adjustable regulator and a hook ring to accept a counter balance.
Our series of metal retainers will work with this gun series. Guns supplied
with airline connector ready for hose attachment.
Unscrew the
metal retainer body from the handle
on the gun (threaded fitting). Load in a filled 8oz
(237cc) plastic dispensing cartridge. Attach a threaded nozzle
or use a male luer lock adapter for attachment of any standard
needle tips.
Press trigger for flow. Release of trigger stops material oozing.
Optional retainer bodies are available to convert this gun to use larger
cartridge sizes 12oz (355cc). This gun includes
(1) gun, (1) cartridge, (1)
plunger, (1)
flange cap, (1)
tip cap, (1)
nozzle, (1)
tip adapter and (1)
tip.
Cartridges are inserted into the cartridge gun threaded
metal retainer. This ensures the cartridge does not move
under constant use of air pressure. All products are industrial grade and are covered
by our no-quibble One Year warranty.
The guns are robust and handle
most liquids and pastes dispensed from them.
General Use: Guns are
light and
can be used in a factory production or assembly department
as well as for repair and re-work. Guns are commonly used
for sealant repair or maintenance applications.
Common
Applications: Dots and beads of solder paste, Dots and
beads of solder flux, Grease to bearings, PVA glue to
furniture joints, RTV to seal seams, Silicone dots to bond
products, Gasket sealant repair, Shots of roach
insecticides, General adhesive applications.
100A series applicator guns have
a
Commodity Tariff Code of 82055980. Plastic components have a
Commodity Tariff Code of 39269097.
Adhesive Dispensing Ltd
provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents,
primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
|
|
|
|
100A Series Pneumatic Gun |
|
|
Air-powered cartridge gun with metal threaded cartridge
retainer. Cost-effective applicator with built-in
adjustable regulator knob to set material flow rate and
to dispense different viscosity materials. With ergonomic
handle and trigger assembly. Quiet operation and
lightweight over long periods of use. |
|
|
|
|
|
|
|
Industrial grade cartridges and
plungers for controlled dispensing of sealants,
adhesives, glues, silicones, solvents, pastes and resins. All
cartridges feature a 1/4 Inch nozzle thread. Cartridges are
safe for use to 100 psi pressure and are certified silicone free
plastics.
Read more... |
|
|
|
|
|
|
|
|
|
|
|
|
Reusable flange end caps and threaded
tip caps for sealing both ends of the cartridge air
tight once materials have been transferred into them. Supplied
in sealed packs with labels and batch codes. Cartridge caps are
certified silicone free plastics.
Read more... |
|
|
|
|
|
|
|
|
Cartridge Plastic Nozzles |
|
|
Industrial dispensing nozzles
with 1/4 Inch thread for leak free
attachment to cartridges and dispensing valves. Supplied in
sealed packs with labels and batch codes. Cartridge nozzles are
safe to 100 PSI and are certified silicone free plastics.
Read more... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cartridge Plastic Nozzles |
|
|
Industrial dispensing nozzles
with 1/4 Inch thread for leak free
attachment to cartridges and dispensing valves. Supplied in
sealed packs with labels and batch codes. Cartridge metal
nozzles are safe to 100 PSI and are certified silicone free
materials. Read
more... |
|
|
|
|
|
|
|
|
|
|
Cartridge Tip Adapter & Luer Lock Tips |
|
|
Industrial precision luer lock tips
work
with the 1/4 Inch thread to luer adapter
fitting. Supplied in sealed packs with labels and batch
codes. Fittings and precision tips are safe to 100 PSI and are
certified silicone free materials.
Read more... |
|
|
|
|
|
|
|
|
The guns are robust and handle most liquids
and pastes dispensed from them. The handle cap uses a hard
wearing rubber gasket seal for the retainer that can be replaced
after very long periods of use. Gaskets held in stock.
Items are shipped by a courier tracked and insured for all items
that are available from stock. Items on a lead time will be
shipped as soon as they are made available. |
|
|
Related Dispensing Products |
 |
 |
 |
 |
 |
Cartridges
Plungers |
Plastic
Nozzles |
Techkit
Cartridges |
Syringes
Consumables |
Luer
Lock
Dispensing Tips |
|
|
10 Ounce Cartridge Applicator Guns |
| We
stock alternative dispensing options for use
with Semco and Techcon 10 Ounce
size cartridges and 1/10GAL sealant tubes- as listed below.
|
|
 |
 |
 |
|
 |
C-110CXO
Pneumatic Gun |
231551
Pneumatic Gun |
110A-10
Pneumatic Gun |
G110
Pneumatic Gun |
AD300CCG
Battery Gun |
|
|
