High density dual component dispense cartridges for two part
adhesives, epoxies, silicones and other fluids. All sets are
supplied with matching pistons and a tip cap ready for filling and
dispensing. Use with our range of manual and pneumatic cartridges
guns. Industrial grade and silicone free.
system 50ml size with 2:1 mix ratio by volume. Materials are stored
in the two chambers of the dual cartridge system and are then
dispensed simultaneously into the static mixer, where dynamic mixing
takes place. Use these products with 2-part epoxies, resins,
sealants, silcones & polyurethanes.
This cartridge is
manufactured in polypro. The kits come with the following parts:
- 50 x Cartridge 2:1 with capacity of 50ml max. - 50
x Vented pistons with cap seal (large). - 50 x Vented pistons
with cap seal (small). - 50 x Dust tip cap.
The static mixer nozzles are available in different diameters
with different volumes and a variety of mixing elements. One of the
main benefits of the system is that not all of the contents of the
cartridge have to be mixed at a time. When use has stopped, the
nozzle is removed for disposal and the cartridge can be closed and
stored for further use, without the material curing.
Standard air-bleed pistons are shipped with this cartridge system
allowing for use with most two component materials. These dual
cartridge products are compatible with either
pneumatic dual cartridge
All products shipped are in sealed boxes or packs
include label with batch codes.
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids -
from watery liquids, solvents, primers and activators through to
thick pastes, sealants, silicones, gels and epoxies.
A-System Dual Cartridge 50ml
Lead Time: Ships 24 Hours
polypropylene plastic body. Air bleed wiper pistons. Supplied
with pistons and a nozzle tip cap. Nozzle attachment is bayonet
twist-on. Use (MA), (MAQ) or (MAHX) series mixer nozzles below with these cartridges.
Material: Polypropylene Barrel Body
Nozzle Attachment: Bayonet Mix Ratio: 2:1 By Volume Maximum Pressure:
Length: 104mm (not including tip cap) Flow Pattern: Straight Description: Dual Cartridge
Features: Silicone-Free/ Industrial Grade
Pack Sizes: 50 or 500
shipped by courier on a tracked and
insured service for stock items. Products on a
lead time or built to order will be sent as soon as available. Customers are informed of
Typical Applications:- Deposits
of two-part resins, epoxies, polyurethanes, silicones, adhesives and
other mixed assembly fluids.
50ml 2:1 Ratio Dual Cartridge Accessories
When selecting a mixer nozzle, consider the viscosity
of the 2-part adhesive, epoxy, sealant or silicone.
For watery liquids, use a small diameter mixer. For pastes or gels,
use a larger diameter mixer. And for materials that require little
mixing, choose a mixer with less elements. For materials that
require a lot of mixing, choose more elements on your mixer which
will be longer. All mixers below work with 2:1 mix ratios.
2017 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.