Adhesive Dispensing


Home > Components > Pistons > 7300006RPK About Us - Contact Us - Site Map - Help
Company Dispensers Valves Tips Barrels Robots Packaging SolutionsContactAssist

You currently have items in your basket. (Total=)


  30cc Clear Barrels
  30cc Black Barrels
  30cc Amber Barrels
  30cc Wiper Pistons
  30cc Easy Flo Pistons
  30cc End Caps
  30cc Adapter 3ft
  30cc Adapter 6ft
  30cc Adapter Orings
  Tip Caps
  Dispense Tips


  Barrel Filling Systems
  Barrel Storage Racks
  Hand Plungers
  Syringe Dispensers


  Prefilled Barrels


  UV Cure
This product is certified silicone free
This product is safe for industrial use
This product is available from stock
Protected by Copyscape

30/50cc Flat Walled Syringe Barrel Piston
7030006RPK 3cc Red Flat Wall Piston Adhesive Dispensing Techcon

Our precision components provide safe and leak free fluid dispensing from syringe barrels. These pistons move flat against the inner walls of the syringe barrel when using high viscosity pastes and fluids.

Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. They are inserted into the syringe barrel to sit on top of the fluid without an air gap. As the material is dispensed, the piston moves down the inner barrel walls for even pressure.  Pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100psi (6.9bar).

Straight Wall Pistons (red) are recommended for reduced stringing and "bouncing" with high viscosity products. Each pack contains 50 pistons and this size works with both 30cc and 55cc size syringe barrels.  All barrels and pistons ship direct from stock.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Product Details

Part ID: 7300006RPK (AD930-SWR)

Syringe barrel wiper piston

Material: Polyethylene
Colour: Red
For Barrel Size: 30/55cc (30/55ml)
Height: 16.00 mm
Outer Diameter: 23.00 mm
Lead Time: Ships within 24 Hours
Size Pack

Part Code

Price Add
30/55cc 50 7300006RPK   pack
30/55cc 500 7300006R-500   pack
30/55cc 1000 7300006R-1000   pack

Syringe Pages

  Silicone and chloride free plastics
  For 30 & 55cc syringe barrels
  Resistant to aggressive fluids & solvents
  Available direct from stock
  Loose fit in syringe to reduce drips
  Supplied in sealed packaging

Copyright  2008 Adhesive Dispensing Ltd. All rights reserved.
Tip Caps



End Caps
Metering valves
Syringe barrels
Cartridge reservoirs
Adhesive dispensers

Air-Powered Dispensers * Industrial Dispensing Components * Precision Valve Systems * XYZ Bench Robots

Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles

|  Privacy   |   Terms   |  Accounts  |

All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us.

Our new web shop is available to order these products in a number of different currencies. Please visit for more details. 

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.


Copyright 2005 - 2017 Adhesive Dispensing Ltd. All rights reserved.

  Syringe Barrels Brochure
  Dispense Tips Brochure
  Syringe Guns Datasheet
  Cartridges Brochure
  Full Catalogue
  Important Safety Information
  Contact Us
  Equipment Recommendations
  Request a Quote
  Technical Support
  Applicator Assist
  Shipment of this product

Items are shipped in the UK by a courier on a next day tracked and insured service for all items that are available from stock. Items on a lead time will be shipped as soon as they are available.

  Further Information

Pistons are made of plastic to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel.