Cartridge gun dispensers are designed for the controlled
application of pastes, gels, adhesives and fluids. High quality
cartridge gun dispensing systems.
Our guns are covered by a one year warranty.
This version gun is for all
10 Ounce size industry
cartridges.
A high quality manual
cartridge gun with quick attach threaded retainer and slight reverse rod action
to reduce oozing. This gun is also suitable for use with pre-filled
Silicone, RTV, Sealant 310ml tubes.
10 Ounce size (310cc/ml approx). Suited to controlled lines or
potting of most adhesives, fluids, sealants, RTV, grease, gels, long cure or
single part epoxies, mastics and potting compounds.
Unscrew the
metal retainer body from the handle
on the gun (threaded fitting). Load in a plastic dispensing cartridge. Ensure the manual metal rod is pulled fully back by
twisting the push rod end facing downwards and pulling it back. Replace the
metal retainer. Attach a threaded nozzle
or use a male luer lock adapter for attachment of any standard
needle tips.
Squeeze trigger for flow. Release of trigger stops material oozing.
Optional retainer bodies are available to convert this gun to use different
cartridge sizes. This gun includes
(1) gun, (1) cartridge, (1)
plunger, (1)
flange cap, (1)
tip cap and (1)
nozzle, (1)
tip adapter and (1)
tip. Or select the full gun kit that includes (10)
of each part above included with the gun applicator.
The guns are robust and handle most liquids and pastes dispensed from
them. The handle cap uses a hard wearing rubber gasket seal for the retainer
that can be replaced after very long periods of use. Gaskets held in
stock.
Items
are shipped in the UK by a courier on a next day tracked and
insured service for all items that are available from stock. Items on a
lead time will be shipped as soon as they are made available.
Warranty: All guns are covered by a 1 (One) Year manufacturers warranty
against fault.
Typical Uses: Guns are portable and can be used in a factory
production or maintenance area, in an assembly department as well as for
repair and re-work. Guns are commonly used in the field for repair or
maintenance applications.
Common Applications:- Deposits
of solder paste, Deposits of solder flux, Grease to bearings, Potting
components with epoxy, RTV to edge seams, Silicone shots to bond
products, Gasket sealant repair, Aircraft maintenance work, General
adhesive applications. Works with 310ml Silicone tubes.
Adhesive Dispensing Ltd provide a wide
range of equipment options for dispensing almost all assembly fluids - from
watery liquids, solvents, primers and activators through to thick pastes,
sealants, silicones, gels and epoxies.
More Info
Part
No.
Specs
Colours
Lead Time
Pack
Price GBP
Add
The AD16 manual cartridge gun is a hand operated, high quality
threaded retainer designed to accept cartridges for the manual
application of semanual cartridge alants, adhesives, potting compounds, and other
materials packaged in disposable cartridges. A similar alternative
to the TS series guns. In various sizes.
Read more...
AD16-110
Manual Cartridge Gun
10 Ounce Bayonet Retainer
Black
24 Hours
1
each
AD16-110KIT
Manual Cartridge Gun Kit
10 Ounce Bayonet Retainer
Black
24 Hours
1
each
More Info
Part
No.
Specs
Colours
Lead Time
Pack
Price GBP
Add
Industrial grade cartridges and
plungers for controlled dispensing
of sealants, adhesives, glues, silicones,
solvents, pastes and resins. All cartridges
feature a 1/4 Inch nozzle thread.
Cartridges are safe for use to 100 psi
pressure and are certified silicone free
plastics.
Read more...
TS110CKIT
10oz Cartridge & Plunger Kit
1.85" OD/ 8.99" Long
Natural/ White
24 Hours
10
pack
TS110C
10oz Cartridge HDPE
1.85" OD/ 8.99" Long
Natural
24 Hours
10
pack
TS110C-BLACK 10oz Cartridge HDPE
1.85" OD/ 8.99" Long
Black
24 Hours
10
pack
TS110C-LD-250
10oz Cartridge LDPE
1.85" OD/ 8.99" Long
Natural
1-2 Weeks
250
pack
TS110CP-250
10oz Cartridge/ Plunger Kit
1.85" OD/ 8.99" Long
Natural/ White
24 Hours
250
pack
TS110CPW-250
10oz Cartridge/ Plunger Kit
1.85" OD/ 8.99" Long
Natural/ Black
1-2 Weeks
250
pack
TS2P Cartridge Plunger 10 Ounce only
1.89" OD
White
24 Hours
10
pack
TS2P-BLACK Cartridge Plunger 10 Ounce only
1.89" OD
Black
24 Hours
10
pack
TS2PW-1000 Cartridge Plunger 10 Ounce only
1.89" OD
Natural
1-2 Weeks
1000
pack
More Info
Part
No.
Specs
Colours
Lead Time
Pack
Price GBP
Add
Reusable flange end caps and threaded
tip caps for sealing both ends of
the cartridge air tight once materials have
been transferred into them. Supplied in
sealed packs with labels and batch codes. Cartridge
caps are certified silicone free
plastics.
Read more...
TS4C
End Cap LDPE 10 Ounce
only
47mm Dia.
Red
24 Hours
10
pack
AD3PB
Tip Cap Threaded Seal HDPE
21mm Dia.
Blue
24 Hours
10
pack
TS3P
Tip Cap Threaded Seal HDPE
21mm Dia.
Red
24 Hours
10
pack
TS6P-RED
Tip Cap Threaded Seal HDPE
21mm Dia.
Red
24 Hours
10
pack
TS6P-BLACK
Tip Cap Threaded Cap
21mm Dia.
Black
2-3 Weeks
1000
pack
TS4P-RED
Tip Cap Push-In Cap
21mm Dia.
Red
1-2 Weeks
1000
pack
TS5P-BLACK
Tip Cap Push-In Cap
21mm Dia.
Black
2-3 Weeks
1000
pack
TS5P-GREEN
Tip Cap Push-In Cap
21mm Dia.
Green
2-3 Weeks
1000
pack
TS4P-BLACK
Tip Cap Push-In Cap
21mm Dia.
Black
2-3 Weeks
1000
pack
TS4P-GREEN
Tip Cap Push-In Cap
21mm Dia.
Green
2-3 Weeks
1000
pack
More Info
Part
No.
Specs
Colours
Lead Time
Pack
Price GBP
Add
Industrial dispensing nozzles
with 1/4 Inch thread for leak free
attachment to cartridges and dispensing
valves. Supplied in
sealed packs with labels and batch codes. Cartridge
nozzles are safe to 100 PSI and are certified silicone free
plastics.
Read more...
Copyright
2018 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
Prices are
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
us.
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.