Adhesive Dispensing

Home   |  Privacy   |   Terms   |  Accounts  |   Contact Us  |   About Us
  Product Search 
 

You currently have items in your basket. (Total=)

Home > Components > Tips > Bend > AD72710090PK
 
           
     
 
27 Gauge Dispensing Tip 1.0 Inch Long 90 Degree Bend
 
High quality stainless steel burr-free tube to moulded colour coded polypropylene hub with double-helix luer lock. Use this tip for dispensing adhesives, solvents, glues, primers, activators and others. A precision cut tube stainless shaft length of 1.0 Inch (25.4mm).
 
AD72710090 Tip 90 Degree Bend 1 Inch Long
 

The TE needle series consist of a stainless-steel shaft with a double helix polypropylene hub. This premier line of dispensing needles is burr-free, and electro-polished shaft for unobstructed and consistent material flow.

Suitable for dispensing most fluids, adhesives and solvents. Certified silicone-free, chloride-free and industrial grade safe for use to 100 psi. Supplied in sealed packs of 50, 500 or 1000. Use these tips for applying most liquids for high precision controlled dispensing.

Tips are colour coded for gauge size. The tip features a tapered internal hub design where the shaft meets the hub to improve fluid flow and reduce any restriction. This allows for a lower pressure to be used for dispensing liquids and pastes. 

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

 
AD72710090 Tip 1.0 Inch Long
 
Excludes Carriage.
Lead Time:
Ships Within 24 Hours
 
Summary: Angled dispensing nozzle tips blunt end stainless steel tube to poypro hub.  
 
Item Qty Price GBP Add
AD72710090PK 50   pack
AD72710090P 500   pack
AD72710090 1000   pack
 
Specifications
 
Materials: Polypro Hub, Stainless Steel Tube
Hub Colour: Clear
Tip Tube Length: 25.4mm (1.0 Inch)
Tip Tube ID: 0.20mm (0.010 Inch)
Tip Tube OD: 0.41mm (0.020 Inch)
Connection Type: Double Helix Luer Lock

Maximum Pressure: 100 PSI (6.89 Bar)
Flow Pattern: Angled
Description: General Purpose Tip
Features: Silicone-Free, Industrial Grade

Pack Sizes: 50, 500 or 1000
MPN: TE727100B90PK
Commodity Code: 90289090
 
 
Delivery: Products shipped by courier on a tracked and insured service for stock items. Products on a longer lead time or built to order will be sent as soon as available. Customers are informed of ship dates. The items listed on this page are held in stock.

Typical Applications:- Deposits of solder paste or solder flux, grease to bearings, potting components with epoxies, RTV to edge seams, silicone shots to bond products, gasket sealant repair, aircraft maintenance work, braze pastes, solvents, threadlockers, general adhesive applications.
 

Angled Tips

 
15 gauge angled bend tip luer lock
 
 
   
  Adhesive dispensers     Syringe barrels   Dispensing tips  
  Dispensers & Valve Controllers     Consumables
Syringes
  Dispensing
Tips
 
 
        Techcon Techkit cartridges  
  Cartridges & Plungers     Dispensing Nozzles   Techkit Cartridges  
 
  Literature
   
  Full Catalogue
  Syringe Barrels
  Cartridges & Nozzles
  Dispense Tips
  Nozzles Brochure
  Dispense Guns
  Dual Air Guns
  Dual Cartridge & Mixers
   
 
This product ships direct from stock
  

     
 
Bend dispensing luer lock tip
 
  Cartridges Techkit Cartridges
Cartridge Plungers Nozzles
Cartridge Kits Cartridge Retainers
Cartridge Caps Cartridge Guns
Syringe Barrels Syringe Guns
Syringe Pistons Dispense Tips
Syringe Caps Manual Syringes
Dual 2K Cartridges Static 2K Mixer Nozzles
Air Dispensers Dispensing Equipment
Syringe Racks Special Offers
 
  Luer Lock Bottles Bench Stands 
Flux Primer Pens Syringe Filling Systems
Threadlocker Adhesives Cyanoacrylate Adhesives
Threadlocker Valves Cyanoacrylate Valves
UV Cure Adhesives Solder Paste Valves
UV Cure Valves Spray Valves
Grease Valves Valve Controllers
XYZ Robots Pressure Pots
Rotary Dispensing Table Contract Fill Repackaging
Fume Extraction Compressors
 
 
 
Techcon
 

Copyright 2018 Adhesive Dispensing Ltd. All transactions subject to Adhesive Dispensing Ltd standard Terms & Conditions, E&OE.

Prices are in UK pounds.  Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping.  Products are covered by a 12-month warranty against faults and malfunction.  All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.

   
 

Website copyright intelligence monitoring


 
 
TSR2201 Robot 200mm x 200mm adhesive dispensing