Adhesive Dispensing

UK Freephone.    0800 094 9058
Lo-Call Tel.  +44 (0) 845 652 0058
Lo-Call Fax. +44 (0) 845 652 0059
Switchboard. +44 (0) 1908
686660

 

Home > Valves > Needle Valves > ADL2030
     
Company Dispensers Valves Tips Barrels Robots Packaging SolutionsContactAssist

You currently have items in your basket. (Total=)



Components

  Syringe Barrels
  Cartridges
  Dispense Tips
  Nozzles
  Mixer Nozzles
  Dual Cartridges
  Fittings & Connectors
  Fluid Lines & Tubing
  Dispensing Bottles
  Dispensing Pens

Dispensers

  Hand Plungers
  Syringe Guns
  Cartridge Guns
  Syringe Dispensers
  Dispensing Equipment
Valves
  RTV Valves
  Cyanoacrylate Valves
  Anaerobic Valves
  UV Cure Valves
  Grease Valves
  Solder Paste Valves
  Spray Valves
  Valve Controllers
  Pressure Pots

XYZ Robots

  Mini Robots
  Small Robots
  Medium Robots
  Large Robots
  Extra Large Robots

Accessories

  Fume Extraction
  Syringe Filling Systems
  Bench Stands
  Syringe Racks
  Compressors
  Cartridge Retainers

Packaging

  Filled Barrels
  Filled Cartridges
  Filled Techkits
  Filled Twin Cartridges

Adhesives

  Cyanoacrylates
  Anaerobics
  UV Cure



128bit SSL Servers


  Bookmark and Share


Hand lever manual needle valve

Hand operated dispensing valve for non timed deposits of many fluids and UV cure adhesives. Simple on/off control with easy to operate lever. Low maintenance design. Takes a direct feed of liquid from a syringe, cartridge or pressure pot.

 

Hand lever needle valve dispenser


The ADL2030 hand held Needle Valve provides precise and continuous micro shot applications for a number of fluids. This low cost hand held valve is excellent for low to medium viscosity fluids such as inks, solvents, UV cure, lubricants, water based glues.

The hand lever will open the needle thus allowing fluids to flow quickly and consistently; when it is released the needle will go back to the closed position. This low cost unit doesn't require the use of a time/pressure dispenser. Takes a direct fluid feed from pressure pot, cartridge reservoir or syringe barrel
.

Always use black fluid lines or feed tubing when dispensing any UV cure adhesives.

Beads of gel

 

All valves are shipped with a luer lock fluid elbow fitting, airline hose with male quick connect, tip cap end seal, selection of dispensing tips and user guide. Valves are supplied with a 1 Year warranty. Do not use this valve for reactive adhesives and fluids such as Cyanoacrylates.

 
Suitable for...
Make beads of adhesives Oils
Potting of components Solvents
Bonding of components Light Grease
Sealing of components UV Cure
Dispense lubricants and greases Lubricants
Chemicals
Inks

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.


Materials

Size

Weight

Viscosity Range

Repeatability Cycle Rate

Flow Rate

             

Aluminium, Teflon Seals

150mm L
x 18mm Diameter

150g

1 - 50,000 CPS

n/a n/a 500ml/min @ 60 psi
             

Min. Shot Size

Mounting

Air Press

Max Fluid Press

Material Inlet Material Out

Colour

             
n/a n/a n/a

60 psi (2 Bar)

6mm Luer Lock Silver
 

 

Product pages

    Ideal for UV cure, solvents, inks
  Fast positive shut off - no drips
  Controlled deposits, lines or potting
  Syringe feed, cartridge or pressure pot
  Supplied with input fitting, fluid lines and tip selection

Quantity

Part Number

Lead Time

Price

Buy

         
1 ADL2030 Ships in 5-7 Days  each
 

     

Adhesive dispensers
Dispensers

Metering valves
Valves
Syringe barrels
Components
Dispensing tips
Tips
     

Air-Powered Dispensers * Industrial Dispensing Components * Precision Dispense Valve Systems * Bench Robots

Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles

 
       
  COMPANY INFORMATION SUPPORT CUSTOMER SERVICE
  About Us Solutions Carriage
  Shipping & Returns FAQ's Terms & Conditions
  Privacy Site Map Help
  Contact Us Assist Accounts
       

Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for their intended use and the user assumes all risk and liability whatsoever in connection therewith. All product information, design, images, links and datasheets contained within this website are the property of Adhesive Dispensing Ltd. Any copying or use of this information without permission is prohibited and may result in legal action. This website is monitored for unlawful copying.

Copyright 2005 - 2014 Adhesive Dispensing Ltd. All rights reserved.
   
 
  Support
   
  Literature
  Syringe Barrels Brochure
  Dispense Tips Brochure
  Dispensing Catalogue
  Part Numbers List
 
  Information
  Important Safety Information
 
  Contact Us
  Equipment Recommendations
  Request a Quote
  Technical Support
  Applicator Assist
 
  Shipment of this product
 

Items are now being shipped globally using UPS Express service which is tracked and insured.

 
 
  Maintenance of this product
 

The valves are robust and handle most liquids but do not use with reactive adhesives such as Cyanoacrylates. The wetted parts on these valves are metal so not for use with adhesives that stick rapidly to metal.

 
 
  Typical Applications
 

These valves are ideal for making beads of inks, oils, UV cure adhesive, solvents and lubricants. Always remember to use the tip cap seal supplied with the valve when not dispensing. Feed direct from a syringe barrel, pressure pot or cartridge reservoir.