Adhesive Dispensing

Home   |  Privacy   |   Terms   |  Accounts  |   Contact Us  |   About Us
 Product Search     
 

You currently have items in your basket. (Total=)

> Home > Equipment > Metering Valves > Auger Rotary Valves > TS5000DMPE-0
 
           
     
 
Motor Driven Auger Valve with Disposable Material Feedpath ...
 
Motor driven auger rotary valve for applying exact dots, controlled beads or potting of most adhesives and liquids. Uses disposable material path (DMP) to eliminate cleanup and maintenance. Operates from a digital dispenser with fluid feed from pressure pot, cartridge or syringe. Positive displacement will not be affected by material viscosity change or room temperature.
 
TS5000DMP Auger Rotary Dispensing Valve
 
This dispensing method uses a rotary feed screw (auger) coupled with a precision DC motor to dispense paste like materials with a rotary displacement action. TS5000DMPE version with an encoder fitted to the DC motor. Right hand side door opening. The encoder for this version is set at 0 Degree position.

The unique design ensures material is constantly present at the feed screw inlet while the controlled rotation of the feed screw dispenses fluid from the feed point out to the dispense tip. Dot size of 0.010 Inch (0.25mm) in diameter can be achieved with high percentage of repeatability rate.

Due to its versatility, high accuracy and ease of setup, the rotary auger valve is the preferred choice in the electronics industry. It can dispense virtually any paste that has viscosity of 30,000 cps or higher, including difficult materials to dispense such as particle filled solder pastes. In fact it is the only valve that can dispense solder paste consistently.

The valve is shipped with the following items:

- Mounting bracket kit (including syringe bracket)
- 30/55cc receiver head assembly
- DIN Connector
- Sample DMP kit of 6, 8 and 16 pitch
- Dispensing tip selection pack

Use our
valve selection guide page. Precision valves will dispense accurate deposits direct from syringe barrels, cartridges or pressure pots. Valves operate with minimal maintenance, ensuring clean and accurate dispensing & can be fixed on a production line or onto an XYZ robot.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
 
TS5000DME-0 Disposable Material Path Valve Encoder
GBP   each ex. Vat.
Excludes Carriage.
Lead Time:
Usually Ships 1-2 Weeks
 
Summary: TS5000DMPE with an encoder fitted to the DC motor. Right hand side door opening. The encoder for this version is set at 0 Degree position. Deposits of solder pastes, die attach, SMT adhesives, thermal compounds, pre-mixed and frozen epoxies, chip encapsulation and dam writing. Disposable feed path assembly version eliminates time consuming cleanup. Variable speed and auger size allow for micro dots or lines of material. Reverse action prevents ooze.  
 
Item Qty Price GBP Add
TS5000DMPE-0 1   each
 
TS5000DMPE-0 Specifications
 
Wetted Parts: Delrin, Viton, Nylon
Body Material: Aluminium
Valve Body Colour: Black/ Gold
Size: 149mm L x 90mm Diameter
Valve Weight: 350 Gram
Fluid Viscosity Range: 30 to 1.3 Million CPS

Repeatability: +/- 0.20%
Input Voltage Range: 5 to 24 VDC
Cycle Rate: Up to 300 cycles/ minute
Minimum Shot Size: 1.5x10-5 cc/ ml
Maximum Fluid Pressure: 30 psi
Material Inlet: Female Luer Lock

Material Outlet: Male Luer Lock
Mounting Size: 25.4mm Wide Channel
Door Opening: Right Side
Encoder Postion: 0 Degree
Fluid Flow Path: 90 Degree
Warranty: 1 Year
 
TS500R Digital Valve Controller TS500R Digital Valve Controller Adhesive Dispensing
GBP   each ex. Vat.
Excludes Carriage.
Lead Time:
Usually Ships 72 Hours
 
Summary: Universal digital valve controller with foot pedal control or remote I/O connection. Make rapid pulses using the timer or steady mode. Memory storage function. Low  pressure alarm. Works with all dispensing valves. Learn more...  
 
Item Qty Price GBP Add
TS500R 1   each
 
TS500R Specifications
 
Type: Electro Pneumatic Timed Dispenser
Initiate: Electric Foot Switch or I/O Port
Air Pressure Display: Digital LCD
Timer Display: Digital LCD

Timer: 0.008 to 60 seconds
Dispense Modes: Timed or Continuous
Output Air Pressure: Up to 100 psi
Input Air Pressure: 254 x 191 x 102 mm
Weight: 2.6kg (5.8lb)

Input Voltage: 110V - 220V AC
Cycle Rate: Up to 1200 cycles/ minute
Timer Tolerances: +/- 0.001%
Meets or Exceeds: CE, TUV-GS, NRTL
Warranty: 1 Year
 
Delivery: Products shipped by courier on a tracked and insured service for stock items. Products on a longer lead time or built to order will be sent as soon as available. Customers are informed of ship dates.

Typical Applications:- Deposits of solder pastes, die attach, SMT adhesives, thermal compounds, pre-mixed and frozen epoxies, chip encapsulation and dam writing.
 

Dispensing Valves

 
 
  Adhesive dispensers     Syringe barrels   Dispensing tips  
  Dispensers & Valve Controllers     Consumables
Syringes
  Dispensing
Tips
 
 
        Metering valves  
  Cartridges & Plungers     Dispensing Nozzles   Metering Dispense Valves  
 
  Literature
   
  Full Catalogue
  Syringe Barrels
  Cartridges & Nozzles
  Dispense Tips
  Nozzles Brochure
  Dispense Guns
  Dual Air Guns
  Dual Cartridge & Mixers
 

  
 
 
Techcon
 

Copyright 2017 Adhesive Dispensing Ltd. All transactions subject to Adhesive Dispensing Ltd standard Terms & Conditions, E&OE.

Prices are in UK pounds.  Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping.  Products are covered by a 12-month warranty against faults and malfunction.  All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.

   
 

Website copyright intelligence monitoring