The TS5322D series
air operated spool valves are suited to making controlled
deposits of many medium to high viscosity gels and pastes. The valve
body is made from aluminium for low maintenance handling of
thick materials such as RTVs, silicones, sealants and grease. A
piston moves back against the flow to shut-off and prevent material
Designed to dispense medium to viscous materials fed from syringes,
cartridges or pumps. The TS5322D provides repeat deposits of
sealants, silicones, RTV, grease and pastes.
are approximately 4.0 Inch (101.6mm) long and 1.38 Inch (35mm) wide.
They weigh approx. 0.31 lbs (141g). The minimum operating air
pressure required is 70 psi. Flow rates (water) are approx.
2700cc/ml gallons per minute @ 100psi (maximum free flow area is
measured without dispense tip adapter, which creates reduced output
The minimum shot size for the valve is approximately
0.002 cc/ml and these valves will cycle up to speeds of 700 deposits
per minute. The viscosity range of fluid is recommended at between
5000 - 1 Million CPS. The maximum fluid pressure is 500psi. The
repeatability is +/- 0.2%.
Recommended digital timed
controllers for these valves are the
applications for this valve include edge sealing using silicones and
sealants, filling and packaging, automated paste dosing.
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids -
from watery liquids, solvents, primers and activators through to
thick pastes, sealants, silicones, gels and epoxies.
TS5322D Spool Valve
GBP each ex. Vat. Excludes
Lead Time: Usually Ships 2-3
Summary: Dispensing valve
includes airline hose with quick connect fitting, mounting
bracket, tip adapter, fluid inlet adapter fitting, selection of
tips, user guide.
Wetted Parts: Polyethylene,
Polypro, Teflon Size:
101.6mm L x 25mm Diameter Hand Lever
Valve Weight: 141 Gram Fluid Viscosity Range: 5,000 to 1 Million
CPS Flow Rate: 2700ml/ Min (water) @ 100 psi Repeatability: +/- 0.2% Material Inlet:
1/8 Inch NPT Thread Material Outlet:
1/8 Inch NPT Thread
Cycle Rate: Up to 500 cycles/ minute
Minimum Shot Size: 0.002cc/ ml Maximum Fluid Pressure: 500 psi
Activation Air Pressure: Minimum 70 psi Mounting Thread Size:
1/4 20UNC-2B Warranty: 1 Year
shipped by courier on a tracked and
insured service for stock items. Products on a
lead time or built to order will be sent as soon as available. Customers
will be informed of
Ideal for silicones,
sealants, greases, gels
Snuff-back action prevents drips
Handles high viscosity materials easily
Repeat fast deposits, dots, lines or potting
Adjustable stroke control for fine tuning
Syringe feed, cartridge or pressure pot
Supplied with hose, input
fitting, tip adapter
Simple to control using TS500R,
2018 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.