Micro precision spray valves
apply low to medium viscosity liquids without excessive mess or waste. Using low pressure
and low volume, they can be adjusted from a jet to a fine mist. Used
with the TS500R digital valve controller for fully automated or
manual operator controlled
TS5540 spray valve provides precise, consistent coating of low to
medium viscosity fluids, including lubricants (oil and grease),
activators and inks. Micro-litre to millilitre amounts can be
reliably dispensed in round patterns with diameters ranging from 1/4
to 3.0 inches (6.35 to 76.2 mm) and in fan patterns with widths up
to 6.0 inches (152 mm).
The combination of adjustable
fluid flow, adjustable nozzle air and post-air cut-off provides
excellent spray control. Precision-machined components with spring
loaded Teflon® packings ensure many millions of trouble-free cycles.
Compact spray valve with round spray pattern nozzle for controlled
precision spraying, bonding, marking or lubricating.
Valves are designed for precise spray applications of low to medium
viscosity materials. An external stroke control makes it easy to
fine-tune fluid flow. Total control of the spray cycle is provided
by adjustable fluid flow and precise control of pre-spray, atomizing
air and post-spray with the TS500R controller. Normal maintenance is
simple and downtime is virtually eliminated with only one seal to
Operation - Input air pressure acts on the piston
that retracts the stainless steel precision needle from the nozzle,
allowing liquid to flow. Simultaneously, low volume low pressure air
flows around the nozzle, dispersing the liquid into fine droplets.
At the end of the cycle, the needle moves to stop the fluid flow,
while air continues for a few milliseconds to ensure that the nozzle
is cleaned of all fluids, providing positive spray cut-off.
TS5540 Spray Valve 0.014" Wide
GBP each ex. Vat. Excludes
Lead Time: Usually Ships 72
Summary: Precision round
pattern spray valve with stainless steel body and stainless
steel 0.046" fan nozzle cap. Adjustable stroke control for precise
flow modification. Suitable for micro spraying of primers,
activators, inks, lubricants, oils, marking fluids & others.
Supplied with airline hose, input fitting and setup guide.
Wetted Parts: Stainless Steel, Teflon
Body Material: Type 303 Stainless Steel
Valve Body Colour: Silver Size:
107mm L x 28.5mm Diameter Valve Weight: 136 Gram
Nozzle: Fan Wide Pattern 0.014" (0.36mm) Fluid Viscosity Range: 1 to
CPS Repeatability: +/- 0.56% Cycle Rate: Up to 600 cycles/ minute
Flow Rate: 1680ml/ minute (water) @ 100 psi Minimum Shot Size: 0.014cc/ ml
Maximum Fluid Pressure: 100 psi Activation Air Pressure: Minimum 70psi Material Inlet
Thread Size: 1/8" NPT Material Outlet Thread Size: Spray Nozzle Mounting Hole Thread Size: 1/4-20UNC-2B
Fluid Flow Path: Straight Warranty: 1 Year
TS500R Digital Valve Controller
GBP each ex. Vat. Excludes
Lead Time: Usually Ships 72
Summary: Universal digital
valve controller with foot pedal control or remote I/O
connection. Make rapid dots or beads using the timer. Memory
storage function. Low pressure alarm. Works with all
dispensing valves. Learn more...
Type: Electro Pneumatic Timed Dispenser
Initiate: Electric Foot Switch or I/O Port Air Pressure Display: Digital
Gauge Timer Display: Digital LCD Timer: 0.008 to 60 seconds Dispense Modes: Timed or Continuous Output Air Pressure: Up to 100 psi Input Air Pressure: 254 x 191 x 102 mm
Weight: 2.6kg (5.8lb)
Input Voltage: 110V - 220V AC Cycle Rate: Up to 600 cycles/ minute
Timer Tolerances: +/- 0.001% Meets or Exceeds: CE, TUV-GS, NRTL Warranty: 1 Year
TS2220 Pressure Pot 2 Litre
GBP each ex. Vat. Excludes carriage.
Lead Time: Ships 24 Hours
Summary: Premium tank unit
with lid, adjustable air pressure gauge, stainless steel tube
fitting, 1/4" OD flexible tube kit, user guide. CE approved.
Use with TS5600 series valves. Learn
Wetted Parts: Polyethylene Outer
Size: 128mm W x 185mm H Inner Chamber Size: 120mm W x 177mm H Fluid
Viscosity Range: Use up to 30,000
CPS Weight: 4.5kg Maximum Air Pressure: 75 psi Air Inlet Connection: 1/4" NPT Thread Material Outlet Connection:
1/4" OD Tubing
Materials: Stainless Steel/ Aluminium
Meets or Exceeds: CE Warranty: 1 Year
Spray Valve Spares
Lead Time: Ships in 72
A range of spares for use with TS5540
spray valves. Repair kits and other fittings.
Luer lock fluid lines in PE material.
Designed to feed liquids, adhesives and fluids under pressure to 100 PSI.
Use with valves and pressure pots. Quick
twist-on/ twist-off connection. 2.54mm ID. Clear and black
tubes are available from stock. Sealed packs of (10).
Learn more ...
shipped by courier on a tracked and
insured service for stock items. Products on a
lead time or built to order will be sent as soon as available. Customers are informed of
Spray deposits of oils, inks, lubricants, conformal coatings, solvents,
primers and more.
2017 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.