Adhesive Dispensing

 

Home > Equipment > Fume Extraction  
     
Company Dispensers Valves Tips Barrels Robots Packaging SolutionsContactAssist

You currently have items in your basket. (Total=)

 

Components

  Cartridges
  Syringe Barrels
  Dispense Tips
  Mixer Nozzles
  Dual Cartridges
  Fittings & Connectors
  Fluid Lines & Tubing
  Dispense Tips

Dispensers

  Syringe Guns
  Syringe Dispensers
Valves
  RTV Valves
  Cyanoacrylate Valves
  Anaerobic Valves
  UV Cure Valves
  Grease Valves
  Solder Paste Valves
  Spray Valves
  Valve Controllers
  Pressure Pots

XYZ Robots

  Mini Robots
  Small Robots
  Medium Robots
  Large Robots
  Extra Large Robots

Accessories

  Syringe Filling Systems
  Bench Stands
  Syringe Racks
  Compressors

Packaging

  Filled Barrels
  Filled Cartridges
  Filled Techkits
  Filled Twin Cartridges

Adhesives

  Cyanoacrylates
  Anaerobics
  UV Cure
 
All components are certified silicone free
Protected by Copyscape

 

Fume Extraction Systems

BVX-103 Fume Extraction Adhesive Dispensing

High performance quality systems for the removal of adhesive and solvent fumes from the work bench. Versatile products providing a safe and clean working environment when handling and dispensing liquids that generate odours.


Fume extraction and filtration systems for a safe working environment when handling adhesives, glues, aerosols, soldering systems and solvents. Removal and reduction of fumes, vapours, mists, particles and dust to the Control of Hazardous to Health (COSHH) regulations 2002 and 2004.

Filtration systems below recirculate air safely back into the workplace without ducting through a series of filters.

Extraction systems below exhaust all filtered air via a flexi-duct to the outside atmosphere such as a window or vent.


Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

BVX-103 Filtration System

Compact fume removal system with adjustable flexible arm. This system is positioned under or above the workbench allowing the arm to be moved into position to where the dispensing or soldering is made. Simple and quick filter replacement. Suitable for use with most adhesives, solders, solvents and other liquids.
Read more...

BVX-203 Filtration System

Compact fume removal system with adjustable dual flexible arms. This system is positioned under or above the workbench allowing the arms to be moved into position to where the dispensing or soldering is made. Simple and quick filter replacement. Suitable for use with most adhesives, solders, solvents and other liquids. Read more...

A200H Filtration System

Filter unit for aerosol adhesives, lacquers, solvents, paints, solders, particles and dust. A2 drawing boards can be placed into the hoods at an angle for efficient overspray capture. The hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc. Read more...

A100H Filtration System

Filter unit for aerosol adhesives, lacquers, solvents, paints, solders, particles and dust. A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture. The hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc. Read more...

T570H-C Filtration System

Filter unit for aerosol adhesives, lacquers, solvents, paints, solders. Contain and filter for a cleaner, healthier working environment within dental labs, electronic design and rework, pharmaceutical labs, education and more.  Accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued. Read more...

TS500S-C Filtration System

Filter unit for aerosol adhesives, lacquers, solvents, paints, solders. Contain and filter for a cleaner, healthier working environment within dental labs, electronic design and rework, pharmaceutical labs, education and more.  Accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued. Read more...

TS700S-C Filtration System

Filter unit for aerosol adhesives, lacquers, solvents, paints, solders. Contain and filter for a cleaner, healthier working environment within dental labs, electronic design and rework, pharmaceutical labs, education and more.  Accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued. Read more...

A300S-D Extraction System

For air fume extraction and removal of aerosol paints, lacquers, adhesives (glue booth for Spray Mount) and airbrush overspray. Solder fume, general solvent vapours and gases extracted to atmosphere.  The A300S-D can also be used in both horizontal and vertical positions. Accommodates products up to A3 size. Read more...

A200H-D Extraction System

Captures, filters and expels for a cleaner, healthier working environment. A2 size components can be placed into the hoods at an angle for efficient overspray capture. The hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc. Read more...

A100H-D Extraction System

Captures, filters and expels for a cleaner, healthier working environment. A1 size components can be placed into the hoods at an angle for efficient overspray capture. The hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc. Read more...

T500S-D Extraction System

Captures, filters and expels for a cleaner, healthier working environment. The folding PETG shield can be stored if not required thus reducing the unit footprint considerably. Handling and/or use of potentially harmful substances takes place in front of the intake filter area. Read more...

T660H-D Extraction System

Captures, filters and expels for a cleaner, healthier working environment. A2 size components can be placed into the cabinet at an angle for efficient fume capture. The hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc. Read more...

T930H-D Extraction System

Captures, filters and expels for a cleaner, healthier working environment. A1 size components can be placed into the cabinet at an angle for efficient fume capture. The hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc. Read more...

 
  Adhesive dispensers   Metering valves   Syringe barrels   Dispensing tips   Cartridge reservoirs
  Dispensers & Valve Controllers   Fluid Dispensing
Valves
  Consumables
Syringes
  Dispensing Needle
Tips
  Cartridges & Dual Cartridges

Air-Powered Dispensers * Industrial Dispensing Components * Precision Valve Systems * Bench Robots

Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles


       
  COMPANY INFORMATION SUPPORT CUSTOMER SERVICE
  About Us Solutions Carriage
  Shipping & Returns FAQ's Terms & Conditions
  Privacy Site Map Help
  Contact Us Assist Accounts
       
 

All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us.

Our new web shop is available to order these products in a number of different currencies. Please visit www.adhesivedispensing.co.uk for more details. 

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.

 

Copyright 2017 Adhesive Dispensing Ltd. All rights reserved.
 
   
   
  Support
   
  Literature
  Full Catalogue
  Dispense Tips Brochure
  Syringe Barrels Brochure
  Syringe Guns Datasheet
  Cartridges Brochure
  Dispense Guns Brochure
 
  Information
  Important Safety Information
  Viscosities Chart
 
  Contact Us
  Equipment Recommendations
  Request a Quote
  Technical Support
  Applicator Assist
 
  Shipment of this product
 

Items are shipped in the UK by a courier on a next day tracked and insured service for all items that are in stock. We use FedEX, DHL, TNT and UPS for overseas shipments.