Motor Driven Auger Valve with Heat Treated Tool Steel ...
Motor driven auger
rotary valve for applying exact dots, controlled beads or potting of most
adhesives and liquids. Operates from a digital
dispenser
with fluid feed from pressure pot, cartridge or syringe. Positive
displacement will not be affected by material viscosity change or
room temperature.
This
dispensing method uses a rotary feed screw (auger) coupled with a
precision DC motor to dispense paste like materials with a rotary
displacement action.
TS5004H-116-15 version with an encoder fitted to the DC
motor. The encoder for this version is set at 135 Degree position.
The unique design ensures material is
constantly present at the feed screw inlet while the controlled
rotation of the feed screw dispenses fluid from the feed point out
to the dispense tip. Dot size of 0.010” (0.25 mm) in diameter can be
achieved with high percentage of repeatability rate.
Due to
its versatility, high accuracy and ease of setup, the rotary auger
valve is the preferred choice in the electronics industry. It can
dispense virtually any paste that has viscosity of 30,000 cps or
higher, including difficult materials to dispense such as particle
filled solder pastes. In fact it is the only valve that can dispense
solder paste consistently.
The valve is shipped with the
following items: - Mounting bracket kit (including syringe
bracket) - 30/55cc receiver head assembly - DIN Connector - Dispensing tip selection
pack
Use our
valve selection guide
page. Precision valves will
dispense accurate deposits direct from
syringe barrels, cartridges or
pressure pots. Valves operate with minimal maintenance, ensuring
clean and accurate dispensing & can be fixed on a production line or
onto an XYZ robot.
TS5004H-116-15 Steel
Auger Valve with Encoder
GBP each ex. Vat. Excludes
Carriage.
Lead Time: Usually Ships
3-4 Weeks
Summary: TS5004H-15 with
an encoder fitted to the DC motor. The encoder for this version is set at 15 Degree position.
6 Watt powerful motor. Heat treated tool steel 8 pitch screw.
Precision deposits of solder paste, die attach, SMT adhesive, thermal
compound, chip encapsulation and
dam writing. This valve has a steel screw and not a replacement
version. Variable speed motor allows for micro
dots or lines of material. Reverse action prevents ooze.
Item
Qty
Price
GBP
Add
TS5004H-116-15
1
each
TS5004H-116-15 Specifications
Wetted Parts: Heat Treated Stainless
Steel Body Material: Aluminium
Valve Body Colour: Black/ Grey Size:
149mm L x 90mm Diameter Valve Weight: 350 Gram Fluid Viscosity Range:
30 to 1.3 Million CPS Repeatability: +/- 0.20% Input Voltage Range:
5 to 24 VDC Cycle Rate: Up to 300 cycles/ minute
Minimum Shot Size: 1.5 x 10-5 cc/ml Bead Rate: Up to 100mm/ Second
Maximum Fluid Pressure: 30 psi Material Inlet: Female Luer Lock Material Outlet: Male Luer Lock Mounting
Size: 25.4mm Wide Channel Screw Pitch Size: 8 Encoder Postion:
15 Degree Fluid Flow Path: 90 Degree Warranty: 1 Year
TS500R Digital Valve Controller
GBP each ex. Vat. Excludes
Carriage.
Lead Time: Usually Ships 72
Hours
Summary: Universal digital
valve controller with foot pedal control or remote I/O
connection. Make rapid pulses using the timer or steady mode. Memory
storage function. Low pressure alarm. Works with all
dispensing valves. Learn more...
Item
Qty
Price
GBP
Add
TS500R
1
each
TS500R Specifications
Type: Electro Pneumatic Timed Dispenser
Initiate: Electric Foot Switch or I/O Port Air Pressure Display: Digital
LCD Timer Display: Digital LCD Timer: 0.008 to 60 seconds Dispense Modes: Timed or Continuous Output Air Pressure: Up to 100 psi Input Air Pressure: 254 x 191 x 102 mm
Weight: 2.6kg (5.8lb)
Input Voltage: 110V - 220V AC Cycle Rate: Up to 1200 cycles/ minute
Timer Tolerances: +/- 0.001% Meets or Exceeds: CE, TUV-GS, NRTL Warranty: 1 Year
Delivery: Products
shipped by courier on a tracked and
insured service for stock items. Products on a
longer
lead time or built to order will be sent as soon as available. Customers are informed of
ship dates.
Typical Applications:-
Deposits
of solder pastes, die attach, SMT adhesives,
thermal compounds, pre-mixed and frozen epoxies, chip encapsulation and
dam writing.
Copyright
2017 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
Prices are
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
us.
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.
