Syringe barrels are no- draft walls with consistent internal diameters that fit perfectly with pistons to guarantee consistent and highly accurate fluid dispensing.

Pistons wipe the syringe insides as liquid is dispensed by a close tolerance fit. This eliminates air entrapment and fluid shear. Pistons are available in 4 styles to suit different liquid and paste types. For sizes 3cc, 5cc, 10cc, 30cc and 55cc.

Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiper seal pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100psi (6.9bar).

Wiper pistons (white) are industry standard and a slightly tighter fit for use with low to medium viscosity fluids or with mechanical devices such as the TS700 series manual syringe gun to prevent leakage past the double wiping edges.

Easy Flow pistons (blue) are recommended for most general applications and they ensure no material residue is left on the syringe barrel walls while dispensing.

Straight wall pistons (red) are recommended for reduced stringing and "bouncing" with high viscosity products. Also available in bulk packs of 1000.

Rubber pistons (black) are ideal for fluxes and pastes where a tighter fit is required. The rubber is a close tolereance fit to the inside of the barrel walls.

All parts listed on this page are held in stock for very fast delivery.