Adhesive Dispensing

Home   |  Privacy   |   Terms   |  Accounts  |   Contact Us  |   About Us
 Product Search   

You currently have items in your basket. (Total=)

> Home > Components > Tips > E Series General Purpose Tips
E Series Precision Dispensing Tips
Offering the widest range of dispensing tips for use with syringe barrels, dispense bottles, dispense valves and robots. All tips are industrial grade safe for use to 100 psi air pressures and are certified silicone-free. Luer lock secure attachment for leak free dispensing. These budget tips have a colour coded luer lock plastic hub that is epoxy bonded to a stainless steel tube.
E27-1/2 Dispensing Tip

The E series consist of a stainles-steel tube shaft with a luer lock colour coded polypropylene hub. This line of dispensing needles is burr-free, and electo-polished shaft for unobstructed and consistent material flow. Designed to dispense most viscosity fluids and adhesives. These tips are epoxy bonded from the metal shaft tube to the plastic hub.

All needle tips are safe to use up to 100 psi air pressure. They are supplied in standard packs of 500 tips. Suitable for use with all syringe barrels and dispense bottles including luer lock (twist on) and luer slip (push on) types for both pneumatic and manual dispensing.

For use with all
luer lock and luer slip syringes, air-powered dispensers, syringe barrels, bottles, fittings and dispensing metering valves. Silicone-free plastics ensure sensitive or specialist adhesives applied using these parts will not become contaminated in use. Select the length of tube required and the gauge size (diameter). 

  Precision burr free blunt stainless tubing
  Wide range of tube diameters
  Silicone free safe plastics to prevent contamination
  Safe for use up to 100 psi fluid pressures
  Luer lock colour coded hubs
  UV filter plastic hubs for UV adhesives
  For use with most fluids, adhesives and solvents

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

SE series dispensing tips

  0.50 Inch Long Blunt End Precision Tips
Available in packs of 500

Precision dispensing tip. Stainless steel shaft to polypropylene colour coded luer lock hub. 1/2 Inch long (12.5mm). Certified silicone-free and industrial grade safe. Supplied in sealed boxes direct from stock.

These tips are suitable for most liquids and pastes and they provide a cost effective solution for dispensing from syringe barrels, bottles and cartridges.
Gauge Part Code Hub Colour Pack OD mm ID mm Price GBP Add
14 E14-1/2 Olive 50 1.83mm 1.60mm GBP   
15 E15-1/2 Amber 50 1.65mm 1.37mm GBP   
16 E16-1/2 Grey 50 1.64mm 1.19mm GBP   
18 E18-1/2 Green 50 1.27mm 0.84mm GBP   
19 E19-1/2 Dk. Green 50 1.05mm 0.70mm GBP   
20 E20-1/2 Pink 50 0.91mm 0.61mm GBP   
21 E21-1/2 Purple 50 0.81mm 0.51mm GBP   
22 E22-1/2 Blue 50 0.71mm 0.41mm GBP   
23 E23-1/2 Orange 50 0.64mm 0.33mm GBP   
25 E25-1/2 Red 50 0.51mm 0.25mm GBP   
26 E26-1/2 Peach 50 0.45mm 0.24mm GBP   
27 E27-1/2 Translucent 50 0.41mm 0.21mm GBP   
30 E30-1/2 Lavender 50 0.30mm 0.15mm GBP   
Back to top
Delivery: Products shipped by courier on a tracked and insured service for stock items. Products on a longer lead time or built to order will be sent as soon as available. Customers are informed of ship dates.

Typical Applications:- Deposits of solder paste, deposits of solder flux, grease to bearings, potting components with epoxy, RTV to edge seams, silicone shots to bond products, gasket sealant repair, aircraft maintenance work, braze pastes, solvents, general adhesive applications.
  Adhesive dispensers     Syringe barrels   Dispensing tips  
  Dispensers & Valve Controllers     Consumables
        Techcon Techkit cartridges  
  Cartridges & Plungers     Dispensing Nozzles   Techkit Cartridges  
  Full Catalogue
  Syringe Barrels
  Cartridges & Nozzles
  Dispense Tips
  Nozzles Brochure
  Dispense Guns
  Dual Air Guns
  Dual Cartridge & Mixers
This product ships direct from stock

  Cartridges Techkit Cartridges
Cartridge Plungers Nozzles
Cartridge Kits Cartridge Retainers
Cartridge Caps Cartridge Guns
Syringe Barrels Syringe Guns
Syringe Pistons Dispense Tips
Syringe Caps Manual Syringes
Dual 2K Cartridges Static 2K Mixer Nozzles
Air Dispensers Dispensing Equipment
Syringe Racks Special Offers
  Luer Lock Bottles Bench Stands 
Flux Primer Pens Syringe Filling Systems
Threadlocker Adhesives Cyanoacrylate Adhesives
Threadlocker Valves Cyanoacrylate Valves
UV Cure Adhesives Solder Paste Valves
UV Cure Valves Spray Valves
Grease Valves Valve Controllers
XYZ Robots Pressure Pots
Rotary Dispensing Table Contract Fill Repackaging
Fume Extraction Compressors
Back to top

Copyright 2019 Adhesive Dispensing Ltd. All transactions subject to Adhesive Dispensing Ltd standard Terms & Conditions, E&OE.

Prices are in UK pounds.  Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping.  Products are covered by a 12-month warranty against faults and malfunction.  All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.


Website copyright intelligence monitoring