Size Manual Syringe Barrel Hand Plunger Dispenser
Hand Plunger Dispensers are designed for the easy application of
pastes, gels, adhesives and fluids. Attach a syringe barrel and
use these dispensers to control fluid deposits. Hand plungers
are low cost solutions and ideal for low volume applications,
repair or re-work or areas where an air supply is not available.
A portable and
lightweight manual hand syringe applicator for applying most pastes,
gels, fluxes, adhesives and greases. Works with 3cc industrial
and wiper pistons. When a small spot of
grease is required to a motor assembly, or for repair work, prototypes,
etc - the HP dispenser is ideal.
attachment and comfortable in the hand. Designed for fluid viscosities ranging
from water to lard with barrel sizes suitable for small dot to medium
volumes. Applying pressure to the manual plunger allows you to control
the dispense volume.
Basic reusable plunger comes with a
(1) single barrel, (1) piston, (1) tip cap and a (3) dispense
tips. Also available as full kits that contain (50) barrels, (50) pistons,
(50) tip caps, (50) end caps and
(50) assorted dispense tips.
All plungers ship direct from stock
and include basic instructions for use.
Parts included in the pack are: -
(1) 3cc Manual Rod Part 7S703HP
(1) 3cc Clear Polypro Syringe Barrel
(1) 3cc White PE Wiper Piston Part
(1) 3cc Orange End Cap Seal Part
(1) Orange Tip Cap Seal Part 7015LLPK
(1) 20GA Pink Dispense Tip Part
(1) 22GA Blue Dispense Tip Part
(1) 25GA Red Dispense Tip Part TN25
operation - take an empty syringe barrel. Attach the luer lock tip kit.
Place the material into the syringe barrel to around 3/4 full. Insert a
plastic wiper piston and push down to material level. Attach to the hand
plunger device. Remove tip cap and attach a dispensing tip. Touch tip to
surface and gently press the plunger for
material flow. When finished, remove the tip and attach tip
cap to seal.
Reusable Syringe Barrel Hand Plunger
ready to use in sealed packs with labels and
batch codes. Select either plunger rod only
or with component kits. All items ship
within 24 Hours.
TS703HP Hand Plunger Only
With (1) each Barrel, Piston, End Cap, Tip Cap, Tip
TDS Tips Guns
TS703HP-KIT Hand Plunger Kit
With (50) each Barrel, Piston, End Cap, Tip Cap, Tips
TDS Tips Guns
903-NW Barrel/ Piston Kit
Natural Barrel with White Plastic Wiper Piston Kit
are shipped in the UK by a courier on a tracked and
insured service with products that are available from stock. Items on a
lead time will be shipped as soon as they are made available.
Adhesive Dispensing Ltd provide a
wide range of equipment options for dispensing almost all assembly
fluids - from watery liquids, solvents, primers and activators through
to thick pastes, sealants, silicones, gels and epoxies.
Nylon, Polypropylene, EPR
11.5 gram (without barrel)
98.55mm (including push rod)
The rods are robust and
handle most liquids and pastes dispensed from them. O-rings can become
worn or covered in glue so they are available to order from stock as
The rod is supplied with (1) rubber O-ring in the pack. For future
replacements, select the 3cc size in EPR or Viton. Please contact us
if replacement rods are required.
Plungers are portable and can be
used in a factory production or assembly department as well as for
repair and re-work. Plungers are commonly used in the field for repair or
Common Applications:- Dots and
beads of solder paste, Dots and beads of solder flux, Grease to
bearings, PVA glue to furniture joints, RTV to seal seams, Silicone dots
to bond products, Gasket sealant repair, Shots of roach insecticides,
General adhesive applications.
With Barrel, Piston, Caps and Tip
Reusable Plunger Rod
Controlled Shot Deposits or Beads
Lightweight yet Robust Construction
Quick Barrel Bayonet Attachment
Low Cost Portable Dispensing Solutions
Air Powered Barrels
Syringe barrels in high density polypropylene for use
with pneumatic dispensers and manual SyringeGuns. In sizes 3cc to
55cc and available in clear, amber or black. Silicone free and
industrial grade safe to 100 psi. Featuring low draft internal bore
and luer lock tip attachment. Includes a range of wiper pistons, end
caps and adapter assemblies.
Luer Lock Dispensing Tips
Our tips are high quality silicone free and range
from standard general purpose, smooth flow tapered, angled bent,
Teflon to flexible polypropylene and brush type. All tips are safe
to use to 100 psi and supplied in sealed packs or boxes. Whether you
require a micro dot or a bead of viscous paste, we have a wide
selection available from stock.
2019 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.