A pneumatic industrial cartridge gun with threaded retainer featuring a quick air exhaust to reduce drips. Suits (310ml) 1/10 Gallon size caulking tube cartridges and pre-filled sealants/ silicones. For the controlled application of most adhesives, fluids, sealants, RTV, grease, gels, long cure or single part epoxies, mastics and potting compounds.

Includes built-in adjustable air regulator, 1/4" BSP barb thread air connector. Compatible with all 310ml pre-filled silicone and sealant caulking tube cartridges (typically 215mm long by 45mm diameter).

Connect the air line to a supply. Undo the threaded front cap and load in a 10oz (310ml) cartridge. Replace the cap and screw tightly to secure the cartridge. Attach a threaded nozzle or use a male luer lock adapter with any standard needle tips. For sealant tubes pre-filled - use sealant tube adapter fitting. Press trigger for flow and adjust regulator for control.

All products are industrial grade and covered by a 1 Year warranty. Empty 310ml cartridge parts can be ordered below or use this applicator gun with pre-filled sealant tubes.

Cost effective pneumatic applicator gun.
Power, precision and reliability.
Strong lightweight aluminium frame with light trigger.
High thrust ratio to handle materials.
Fast air exhaust release prevents material oozing.
Built-in adjustable air regulator to set flow rates.
1-Component cartridge use.
310ml (215mm L x 50mm OD) standard size.
Use with low to medium viscosity materials.
Gun weight: 0.6 kg.
Gun length: 360mm.

Guns have a  Commodity Tariff Code of 82055980. Plastic components have a Commodity Tariff Code of 39269097.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.