The TS5600 series dispense valves accurately control the application of most low to medium viscosity fluids without drips. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. The adjustable open/close stroke 0.13mm to 0.64mm (0.005 Inch to 0.025 Inch) allows for a very fast response with positive shutoff. Wetted components are made of inert plastics.

Takes a direct feed from any pressure pot, cartridge or syringe and includes a selection of flexible fluid line tubing and connectors. Valve open time can be as short as 15 milliseconds. Model TS5622VT with Teflon wetted parts is used for dispensing solvents, cyanoacrylates, anaerobics and fluxes. Simple to use with TS550R, TS250, TS350 digital timed controllers.

The valves are easy to use and maintain with user replaceable spare parts. Use UHMW or Teflon with cyanoacrylates, anaerobics, liquid fluxes, resins, lacquers, primers, activators, inks, solvents. TS250, TS350 or TS550R recommended controllers. Use TS1215, TS2220, TS2250 TS1258 or TS22100LS pressure pots.

Precision valves will dispense accurate deposits direct from syringes, cartridges or pressure pots. Valves operate with minimal maintenance, ensuring clean and accurate dispensing & can be fixed on a production line or onto an XYZ robot. All valves have a commodity code of 90282000.

	Specifications Wetted Parts: Teflon Fluid Housing Head Colour: White Size: 76mm L x 27mm Diameter Valve Weight: 118 Gram Fluid Viscosity Range: 1 to 50,000 CPS Repeatability: +/- 0.30% Cycle Rate: Up to 500 cycles/ minute Flow Rate: 3432ml/Min (water) @ 100 psi Minimum Shot Size: 0.0075cc/ ml Maximum Fluid Pressure: 100 psi Activation Air Pressure: Minimum 70psi Material Inlet Thread Size: 1/8 Inch NPT Material Outlet Thread Size: 1/4-28 UNF Mounting Hole Thread Size: 10-32 UNF Body Material: Aluminium Valve Body Colour: Black Fluid Flow Path: 90 Degree Warranty: 1 Year