Adhesive Dispensing

Home   |  Privacy   |   Terms   |  Accounts  |   Contact Us  |   About Us
Product Search
 

You currently have items in your basket. (Total=)

Home > Components > Dispensing Pens > 381-8425-AP
 
           
     
 
Acrylic Pointed Nib Replacement
 
Precision components provide safe and leak free fluid dispensing of inks, primers, adhesives, solvents and other assembly fluids. These spring loaded pen caps have an acrylic nib with non-return spring loaded cap. This part is for replacement pointed style acrylic nibs only.



Felt nib acrylic flux pens
 

Flow-seal environmental pens and bottles channel controlled amounts of no-clean flux, RMA, solvents, lubricants, masking and water-based liquids. Flow-seal products prevent evaporation of material and conform to current regulations for controlling substances capable of evaporation hazard. A unique dispensing valve prevents flooding and spattering, releasing material in controlled amounts to the nib (tip).

The pen is in two parts (cap and reservoir) and is easily assembled. The reservoir should be filled with material to within 0.75 Inch (19mm) of the top; this air chamber allows for the valve cap to be pressed securely in position. Priming is achieved by depressing the nib while the pen is vertical. This part is for a replacement pointed style acrylic nibs only (pack of 10).

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

     
More Info Part No.

Type

Specs Lead Time

Price GBP

Add
Spring Loaded Nib Pens. Small dispensing pens where the solvent is placed inside the aluminium body. As the nib is pressed against a surface, it retracts allowing a gap for solvent to flow onto the nib ready for application.
381-8425-AP 381-8425-AP
Replacement Nib
Pointed Shape Acrylic Nib Yellow For FPA Pen
Nib Only
24 Hours   pack 10
 
381-8425-AC 381-8425-AC
Replacement Nib
Chisel Shape Acrylic Nib Yellow For FPA Pen
Nib Only
24 Hours   pack 10
381-8425-AB 381-8425-AB
Replacement Nib
Bullet Shape Acrylic Nib Yellow For FPA Pen
Nib Only
24 Hours   pack 10
381-8425-PC 381-8425-PC
Replacement Nib
Chisel Shape Polyester Nib White For FPA Pen
Nib Only
24 Hours   pack 10
 
FPA-10 FPA-10
Spring Nib Pen
Aluminium Body
Acrylic Nib
10ml Size Complete Assembly 24 Hours   pack 10
FPA-10 FPA-10-100
Spring Nib Pen
Aluminium Body
Acrylic Nib
10ml Size Complete Assembly 24 Hours   pack 100
   
Typical Uses: Applicators are all tested and suitable for handling solvents, primers and solvent based glues. They all use wetted parts designed for liquids to be applied safely.

Common Applications:-
Deposits of solvents, solvent based glues, cements as well as primers, activators, fluxes and other liquids. Solvent cement, plastic welding, repairs, cases, displays, primers to rubbers, etc.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
 
The products are robust and handle most liquids and fluids dispensed from them. Supplied with full instructions and our full technical support by phone or email. For dispensing machines we include all fittings, tubing, connectors, adapters and a wide selection of precision dispensing tips with the system.

Items are shipped from the UK by a courier on a tracked and insured service for all items that are available from stock. Items on a lead time will be shipped as soon as they are made available.

Warranty: All dispensing products are covered by a 1 (one) Year manufacturers warranty against fault. These products are disposable.
 
  Adhesive dispensers     Syringe barrels   Dispensing tips  
  All Dispensers & Valve Controllers     Consumables
Syringes
  Dispensing Needle
Tips
 
 
        Techcon Techkit cartridges  
  Cartridges & Plungers     Dispensing Nozzles   Techkit Cartridges  
 
  Literature  
     
  Full Catalogue  
  Syringe Barrels  
  Cartridges & Nozzles  
  Dispense Tips  
  Nozzles Brochure  
  Dispense Guns  
  Dual Air Guns  
  Dual Cartridge & Mixers  
 

  
 
  Syringe Barrels Syringe Pistons
Syringe Guns Cartridge Guns
Syringe Dispensers Dispensing Equipment
Mini Robots Small Robots
Medium Robots Large Robots
Extra Large Robots Fume Extraction
Bench Stands Syringe Racks
Compressors Cartridge Retainers
Cyanoacrylates Anaerobics
 
  Dispense Tips Tip Caps 
RTV Valves Cyanoacrylate Valves
Anaerobic Valves UV Cure Valves
Grease Valves Solder Paste Valves
Spray Valves Valve Controllers
Pressure Pots Syringe Filling Systems
Cartridges Nozzles
Bottles Techkits
Dual Cartridges Mixer Nozzles
 
 
Techcon
 

Copyright 2018 Adhesive Dispensing Ltd. All transactions subject to Adhesive Dispensing Ltd standard Terms & Conditions, E&OE.

Prices are in UK pounds.  Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping.  Products are covered by a 12-month warranty against faults and malfunction.  All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.

   
 

Website copyright intelligence monitoring