Bench top dispensing systems for
the controlled application of liquids and pastes. Digital
display with adjustable air regulator and an adjustable
timer. Vacuum suck back to control drips. Make repeat shots
or controlled beads of any liquid at the press of a
The TS250 system will dispense virtually any
assembly fluid and adhesive or liquid paste, from thin, watery
liquids and solvents to thick gels, silicones and brazing
pastes. All are applied quickly, accurately to reduce waste,
mess and hand fatigue.
This is the 0-15 psi
adjustable air regulator version for low viscosity fluids, solvents,
Cyanoacrylate adhesives, primers, inks and liquids. You hold the
syringe like a pen, adjust the air pressure to suit the liquid being
dispensed then press the foot pedal to apply. When the pedal is
released, the deposit instantly stops without drips or oozing. It is
safe and simple to use and reduces time spent manually applying liquids.
The dispenser is supplied with a user guide.
An adjustable vacuum provides suck-back to
the tip to prevent watery liquids from dripping. We recommend the use of
an inline filter on the air adapter to the syringe when dispensing low
viscosity fluids. The LCD display shows the timer which can be adjusted
from 0.02 to 60 seconds for repeat deposits, down to micro-dots. A shot
counter shows the number of deposits made during a shift.
Electric footswitch, finger or I/O port
Analog gauge 0-15 psi
None (manually adjustable knob)
0.02 to 60 seconds
Timer or steady mode (continuous)
To 100 PSI (TS250), 15 PSI (TS255)
152 x 165 x 178mm
110V AC - 220V AC
Up to 600 cycles/minute
Meets or Exceeds:
CE, TUV-GS, NRTL
This compact cost effective
dispenser sits on the work bench and requires an air input from any
compressor or factory mains supply delivering 75 psi or above.
are industrial grade and are covered by our no-quibble One Year warranty.
Dispensers are supplied with user guide to assist with the
initial setting up process. Customers can contact us for full
support and advice in using this timed barrel dispensing station.
What is supplied with the TS255 Dispenser?
The package includes:
1 x TS255 Digital Dispensing System
1 x 100V-240V AC Power Adapter with Worldwide Plugs
1 x Airline Hose with Fittings Kit
1 x Electric Foot Switch
1 x Syringe Barrel Bench Holder Stand
1 x 10cc Adapter Assembly with 3ft long Hose
1 x 10cc Clear Syringe Luer Lock Barrel
1 x 3cc Wiper Plastic Piston
1 x 3cc End Cap Seal
1 x Tip Cap Seal
x Assorted Needle Tips
1 x User Guide Setup Manual
Items are shipped in the UK by a courier on a tracked
and insured service with products that are available from
stock. Items on a longer lead time will be shipped as soon
as they are made available.
Dispensers can be used in a factory production or
assembly department to assemble products quickly and without
material waste. They can be set to make repeat deposits of
materials or controlled beads. These dispensers will handle
watery liquids to thick pastes. This versions has an I/O
port so can also be linked to a PLC.
Solvent weld to plastics, primers to substrates, inks to
recess parts, Cyanoacrylate adhesives to plastic, metal and
wooden parts, etc.
Adhesive Dispensing Ltd provide a wide
range of equipment options for dispensing almost all assembly fluids - from
watery liquids, solvents, primers and activators through to thick pastes,
sealants, silicones, gels and epoxies.
Description / Quantity
TS255 0-15 PSI Version Timed Shot Dispenser
10cc / 10ml
Barrels Tariff Code: 90269000 Lead
Time: 24 Hours
TS255 Dispenser (1)
Clear Syringe Barrel (1)
White Wiper Piston (1)
Orange End Cap Seal (1)
Orange Tip Cap Seal (1)
Dispensing Tip (5)
TDS Guide I/O
DCK600 TipKit Box
Red Colour Case Varied Tip Sizes Tariff Code: 90289090 Lead
Time: 24 Hours
Case Colour: Red
Types: Taper, General, Bent
Lengths: 0.50" (12.7mm)
For: Dispensing of All Materials
Attachment: Luer Lock
Pack Size: (145)
TDS Catalog Info
Small footprint takes up less space
Integrated air pressure regulator
Powerful vacuum suck back stops drips
Timer for repeat deposits or beads
Shot counter display keeps track of rates
Footswitch and I/O connector
LCD display for accurate readings
Solvent dots to display cases
RTV beads to display cases
Grease deposits to bearings
Potting connectors & switches
Micro dots of adhesives
Ink and paint deposits
and many more...
in GBP pounds. Vat is charged on all UK orders. We provide VAT
invoices with all transactions. Vat is not charged on any orders placed
with us that ship outside the UK and EU. No VAT is charged for any
orders placed for shipment to the EU only if a valid company VAT number
is provided to us at time of order or prior to shipping. Products
are covered by a 12-month warranty against all faults and malfunction.
All orders placed online are encrypted for total
safety and security. Additional encryption now protects all of the
web pages on this site. Please read our
agreement for details of how we conform to GDRP. We can also
process any phone or fax payments by credit and debit cards.
Please contact our accounts department if you would like to apply for a
30 day credit account with us.
Disclaimer: While reasonable efforts have been made
to ensure all information on this website is
accurate, Adhesive Dispensing Ltd. do not assume
responsibility for any errors or omissions. All
specifications, illustrations, data and prices are
subject to change without notice.
Copyright 2019 Adhesive
Dispensing Ltd. All rights reserved.
All products are safe for
use for industrial applications. The components are leak-free and
supplied in sealed packaging to prevent contamination.
Silicone Free Products
Products including air
powered barrels, cartridges, nozzles, luer tips, fluid lines, tubing,
caps and seals - are certified silicone free to prevent contamination of
sensitive adhesives dispensed from them.