|
Digital Timed Shot Dispensers |
|
Precision
dispensing systems handle most adhesives, liquids, gels and pastes
without mess, waste, error or hand fatigue. Simple to use dispensers
for making measured amounts, controlled lines or potting of most
adhesives and assembly
fluids. These dispensers have digital timers and LCD displays for
higher levels of control. |
|
 |
|
|
Dispensing products for the
controlled application of liquids, adhesives, pastes, gels, epoxies,
sealants, greases, lubricants, inks, paints and primers. Fluids can be
applied without mess, waste or inconsistency.
Systems to apply thick pastes
without strain or fatigue to hands. Timed dispensers to reduce the amount of
adhesive used by applying a precise and repeatable deposit each time.
Reduce assembly time by
eliminating guesswork. Select from low cost non timed manual dispensers to
digital timed and positive displacement systems. If an application requires
repetitive deposits of a fluid, a timed dispenser will reduce the overall
time it takes by 50% compared to manual dispensing. And each shot will be
exactly the same.
Customers achieve labour time and material savings
using our digital timed dispensers. By setting a repeat deposit of liquid;
waste and material mess is eliminated. When compared to squeeze tubes,
toothpicks, swabs and scrapers, controlled dispensing will always be a cost
effective investment.
|
|
|
Adhesive Dispensing Ltd provide a wide
range of equipment options for dispensing almost all assembly fluids - from
watery liquids, solvents, primers and activators through to thick pastes,
sealants, silicones, gels and epoxies.
|
|
|
Digital Timed Shot Pneumatic Syringe Barrel
Dispensers |
|
Benchtop syringe type barrel dispensing systems
with adjustable timers and 0-100 psi for most materials or 0-15 psi air pressure control
for watery liquids.
Used to make repeat dots or beads of almost any fluid or liquid. Vacuum
suck-back to prevent drips or ooze. Popular
fluid dispensers with digital timer displays supplied ready to use.
Timers can be switched off for making controlled
beads. All products are CE approved and covered by
comprehensive warranties. Commodity tariff code
90282000. |
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
 |
|
TS250 |
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 100 PSI |
| Timer: 0.02 to 60 Sec (Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 152 x 165 x 178mm |
| Weight: 1.2kg |
| Input Voltage: 100/240 VAC 50/60Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE, TUV-GS, NRTL |
| Ships Within 24 Hours |
|
each |
 |
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
TS255 |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 15 PSI |
| Timer: 0.02 to 60 Sec (Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 152 x 165 x 178mm |
| Weight: 1.2kg |
| Input Voltage: 100/240 VAC 50/60Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE, TUV-GS, NRTL |
| Ships Within 24 Hours |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
TS350 |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 100 PSI |
| Timer: 0.008 to 60 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 152 x 165 x 178mm |
| Weight: 1.2kg |
| Input Voltage: 100/240 VAC 50/60Hz |
| Cycle Rate: Up to 1200
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE, TUV-GS, NRTL |
| Ships Within 24 Hours |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
TS355 |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 15 PSI |
| Timer: 0.008 to 60 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 152 x 165 x 178mm |
| Weight: 1.2kg |
| Input Voltage: 100/240 VAC 50/60Hz |
| Cycle Rate: Up to 1200
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE, TUV-GS, NRTL |
| Ships Within 24 Hours |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
 |
|
1000T |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 100 PSI |
| Timer: 0.001 to 99 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 246 x 145 x 65mm |
| Weight: 2.8kg |
| Input Voltage: 220 VAC 50Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE |
| Ships Within 24 Hours |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
1000TE |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 100 PSI |
| Timer: 0.001 to 99 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 246 x 145 x 65mm |
| Weight: 2.8kg |
| Input Voltage: 1100 VAC 60Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE |
| Ships Within 1-2 Weeks |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
2000T |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 100 PSI |
| Timer: 0.001 to 99 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 246 x 145 x 65mm |
| Weight: 2.8kg |
| Input Voltage: 220 VAC 50Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE |
| Ships Within 1-2 Weeks |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
2000TE |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 100 PSI |
| Timer: 0.001 to 99 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 246 x 145 x 65mm |
| Weight: 2.8kg |
| Input Voltage: 110 VAC 60Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE |
| Ships Within 1-2 Weeks |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
 |
|
AD1001 |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 100 PSI |
| Timer: 0.001 to 99 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 220 x 210 x 67mm |
| Weight: 1.59kg |
| Input Voltage: 100/240 VAC 50/60Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE |
| Ships Within 24 Hours |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
SL101N |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 100 PSI |
| Timer: 0.01 to 99 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 219 x 215 x 67mm |
| Weight: 1.59kg |
| Input Voltage: 100/240 VAC 50/60Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE |
| Ships Within 1-2 Weeks |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
SL101-15 |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Output Air Pressure: 1 to 15 PSI |
| Timer: 0.01 to 99 Sec
(Adjustable) |
| Vacuum Suckback: Adjustable Knob |
| Dimensions: 219 x 215 x 67mm |
| Weight: 1.59kg |
| Input Voltage: 100/240 VAC 50/60Hz |
| Cycle Rate: Up to 600
cycles/minute |
| Timing Tolerances: +/- 0.001% |
| Meets/ Exceeds: CE |
| Ships Within 1-2 Weeks |
|
each |
|
|
|
|
Digital Timed Shot Peristaltic Pump Air Free
Dispensers |
|
Air-free peristaltic pump dispensing systems for
handling most low to medium viscosity liquids and
fluids. Especially useful for dispensing
Cyanoacrylates and UV Cure. Draws liquid from a
bottle by pressure on a tube so requires no mains
air supply. Digital LED display DISP5600 version or
DISP5500 version. Timers can be switched off for
making controlled beads. All products are CE
approved and covered by comprehensive warranties.
Commodity tariff code 90269000. |
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
 |
|
ADL-DISP5500 |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Type: Peristaltic Air Free
Dispenser |
| Initiate: Electric Finger/ Foot
Switch |
| Forward/Reverse Mode: 0.01-99.9
Sec |
| Minimum Dot Size: 0.0001cc/ ml |
| Max.Fluid Viscosity: Up to
10,000cps |
| Input Voltage: 220 VAC 50/60Hz |
| Cycle Rate: Up to 300
cycles/minute |
| Dimensions: 190 x 184 x 94mm |
| Weight: 3.4kg |
| Meets/ Exceeds: CE |
| Ships Within 24 Hours |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
ADL-DISP5600 |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Type: Peristaltic Air Free
Dispenser |
| Initiate: Electric Finger/ Foot
Switch |
| Forward/Reverse Mode: 0.01-99.9
Sec |
| Minimum Dot Size: 0.0001cc/ ml |
| Max.Fluid Viscosity: Up to
10,000cps |
| Input Voltage: 220 VAC 50/60Hz |
| Cycle Rate: Up to 300
cycles/minute |
| Dimensions: 190 x 184 x 94mm |
| Weight: 3.5kg |
| Meets/ Exceeds: CE |
| Ships Within 24 Hours |
|
each |
|
|
|
|
More Info |
Part Code |
Description |
Price GBP |
Add |
|
|
|
|
PPD-130 |
|
Dispensers |
|
Catalogue |
|
Barrels & Tips |
|
Barrel Dispensing |
|
| Type: Peristaltic Air Free
Dispenser |
| Initiate: Electric Finger/ Foot
Switch |
| Forward/Reverse Mode: 0.01-99.9
Sec |
| Minimum Dot Size: 0.0001cc/ ml |
| Max.Fluid Viscosity: Up to
10,000cps |
| Input Voltage: 220 VAC 50/60Hz |
| Cycle Rate: Up to 300
cycles/minute |
| Dimensions: 182 x 171 x 84mm |
| Weight: 3.5kg |
| Meets/ Exceeds: CE |
| Ships Within 72 Hours |
|
each |
|
|
|
Syringe barrel dispensers require
clean and dry compressed air from most small compressors, a mains
factory air supply or nitrogen. We recommend the use of a 5 micron air
filter on the supply air into the dispenser. This will reduce oil,
moisture and particles from the air. Perisaltic pump air-free dispensers just
require electric power.
No other maintenance is required as
the dispenser applies liquid direct from a syringe barrel or PTFE tube without
any machinery being
in direct contact with it. Syringe barrels and dispense tips are all
disposable as are the PTFE tubes.
Pneumatic dispensers will handle
all viscosity liquids from thin solvents to thick pastes.
Customers use these systems for a wide range of dispense
projects. Common applications include solder paste, fluxes,
silicones, gels, UV cure, Cyanoacrylate & more. Peristaltic
pumps handle low viscosity liquids.
CE approved machines
with serial numbers and batch codes. All dispensers are shipped
with easy to understand user guides to assist setting up.
Syringe barrel dispensers require a compressed air supply of
around 70-100 PSI. Peristaltic pumps do not require any
compressed air.
Items are shipped in the UK by a
courier on a next day tracked and insured service for all items
that are available from stock. Items on a lead time will be
shipped as soon as they are available. |
|
|
|
|
