The SL101N system will dispense virtually any assembly fluid and adhesive or liquid paste, from thin, watery liquids and solvents to thick gels, silicones and brazing pastes. All are applied quickly, very accurately and with zero waste, hand fatigue or mess. This is a system available with 0-100 psi adjustable air regulator for most fluids and pastes or with a 0-15 psi regulator for watery liquids, cyanoacrylates and solvents. You hold the syringe like a pen, adjust the air pressure to suit your liquid being dispensed and press the foot pedal to dispense. When the foot pedal is released, the deposit instantly stops without drips or oozing. It is safe and simple to use and reduces time spent manually applying liquids. The SL101N offers high precision control over watery liquids to thick pastes in a compact bench top system. With a bright LED screen that displays time, vacuum, air pressure, time memory storage (up to 9) and shot counter. These high quality precision dispensers will make micro dots, large dots and controlled lines of almost any adhesive, paste, gel, epoxy and compound. Syringe sizes available range from 3cc to 55cc. Use supplied foot pedal or optional finger switch. Features memory storage for up to 9 time settings, teach mode to reduce setup time and dual air output. A sophisticated bench dispenser to handle most adhesives and liquids. This dispenser requires an air input from any compressor or factory mains supply. It comes with airline hose and fittings kit to make connection easy. It will work with any power supply and is supplied with plugs for use in most countries. Includes a syringe stand, 10cc syringe and piston pack and tip kit selection. Ready to use out of the box. Use this dispenser for making micro dots of liquids, gels and pastes or controlled beads and lines. Or potting products with a high level of control. Will handle braze pastes, solder pastes, silicones, sealants, UV cure adhesives, flux materials, conformal coatings, Cyanoacrylate instant adhesives, solvents, contact glues, PVA, etc. Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.   Applications Dotting Beading Potting Bonding Sealing Lubricating

Dispensers require clean and dry compressed air from most small compressors, a mains factory air supply or nitrogen. We recommend the use of a 5 micron air filter on the supply air into the dispenser. This will reduce oil, moisture and particles from the air source. No other maintenance is required as the dispenser applies liquid direct from a syringe barrel without being in direct contact with it. Items are shipped by a courier on a tracked and insured service for all items that are available from stock. Items on a lead time will be shipped as soon as they are available with customers notified of expected shipd date. Dispensers will handle all viscosity liquids from thin solvents to thick pastes. Customers use these systems for a wide range of dispense projects. Common applications include solder paste, fluxes, silicones, gels, UV cure, Cyanoacrylate and more.compact cost effective dispenser sits on the work bench and requires an air input from any compressor or factory mains supply delivering 75 psi or above. All products are industrial grade and are covered by our no-quibble One Year warranty. Dispensers are supplied with user guide to assist with the initial setting up process. Customers can contact us for full support and advice in using this timed barrel dispensing station. Items are shipped in the UK by a courier on a tracked and insured service with products that are available from stock. Items on a longer lead time will be shipped as soon as they are made available. General Use: Dispensers can be used in a factory production or assembly department to assemble products quickly and without material waste. They can be set to make repeat deposits of materials or controlled beads. These dispensers will handle watery liquids to thick pastes. Common Applications:- Dots and beads of solder paste, Dots and beads of solder flux, Grease to bearings, PVA glue to furniture joints, RTV to seal seams, Silicone dots to bond products, Gasket sealant repair, Shots of roach insecticides, Modelling, General adhesive and glue applications.

1 x SL101 Digital Dispenser 1 x 220V AC Power Adapter Plug 1 x Airline Hose with Fittings Kit 1 x Electric Foot Switch, 1 x Finger Switch 1 x Syringe Barrel Holder 1 x 10cc Adapter Assembly 3ft Hose 1 x 10cc Clear Barrels Luer Lock 1 x 10cc Wiper Plastic Pistons 1 x 10cc End Cap Seals 1 x Tip Cap Seal 10 x Assorted Luer Lock Tips 1 x User Guide   Specifications: Part ID: SL101 Type: Electro-pneumatic Dispenser Initiate: Electric footswitch Pressure Display: Analogue gauge 0-100 psi Timer Display: Digital LED Vacuum Display: None (manually adjustable knob) Dispense Timer: 0.01 to 99.99 seconds Dispense Modes: Timer/ steady mode (continuous) Output Pressure: To 100 PSI Input Pressure: 80-100 psi Size: 219 x 215 x 67mm Weight: 1.59kg Input Voltage: 100-220V AC Warranty: 1 Year Cycle Rate: Up to 1200 cycles/minute Timing Tolerances: +/- 0.001% Meets or Exceeds: CE, RoHS Brand: Fisnar Commodity Code: 90282000

Description

Description

Description

Description

Description

Description

Description